PE WRE Learning Hub · PE Civil: Water Resources and Environmental · Area 11 of 12
Wastewater Collection and Treatment — PE WRE
Topic video on its way — a detailed walkthrough of Wastewater Collection and Treatment, with animations and worked examples.
Watch the topic: the detailed video walkthrough of Wastewater Collection and Treatment will sit here.
Take the 3-question mini-quiz ↓
Wastewater collection
Gravity sewers are sized with Manning's equation but checked against velocity limits at both ends: at least about 2 ft/s at design flow to stay self-cleansing, and not so fast as to scour. Peaking factors convert average flow to peak hourly flow for sizing, and infiltration and inflow (I/I) — groundwater through defects, storm water through illicit connections — add a wet-weather allowance that old systems feel most. Lift stations take over where gravity runs out of fall, with wet-well sizing set by pump cycling.
Full-flow sewer: Q = (1.486/n) A R2/3 S1/2, R = D/4 flowing full · Peak flow = peaking factor × average flow
Worked example Full-flow capacity of a 12-in sewer
Given: A 12-in sewer (D = 1.0 ft) with n = 0.013 is laid at S = 0.004. Find its full-flow capacity and velocity.
Solution:
- A = π/4 × 1.0² = 0.785 ft²; R = D/4 = 0.25 ft; R2/3 = 0.397; S1/2 = 0.0632.
- Q = (1.486/0.013) × 0.785 × 0.397 × 0.0632 = 114.3 × 0.785 × 0.397 × 0.0632 ≈ 2.25 ft³/s.
- V = Q/A = 2.25/0.785 = 2.87 ft/s — above the 2 ft/s self-cleansing threshold.
Answer: Full-flow capacity ≈ 2.25 ft³/s at 2.87 ft/s.
Activated sludge: F/M and MCRT
The food-to-microorganism ratio, F/M, divides the BOD load applied by the mass of mixed-liquor solids under aeration; it sets how hard the biomass is worked. The mean cell residence time (MCRT, or sludge age) divides the same solids mass by the solids wasted and lost per day; it sets which organisms survive — nitrifiers, being slow growers, need a long MCRT, especially in cold water. The two ratios share a numerator family but answer different questions, and swapping them is the planted error.
F/M = (Q × BOD × 8.34) / (V × MLSS × 8.34) · MCRT = solids under aeration / solids removed per day
Worked example Food-to-microorganism ratio
Given: An aeration basin of 0.25 million gal holds MLSS at 2,500 mg/L. The plant flow is 1.0 MGD at 200 mg/L BOD. Find F/M.
Solution:
- Food applied: 1.0 × 200 × 8.34 = 1,668 lb/day.
- Microorganism mass: 0.25 × 2,500 × 8.34 = 5,213 lb.
- F/M = 1,668 / 5,213 = 0.32 per day.
Answer: F/M ≈ 0.32 /day.
Clarifiers, BOD removal and solids
Treatment performance is reported as removal efficiency — (in − out)/in — applied to BOD and suspended solids across each stage and the whole plant. Secondary clarifiers are checked hydraulically (overflow rate) and on solids (loading rate), exactly as in Analysis and Design, with the return activated sludge flow included in the solids flux. Solids handling then thickens, stabilises (digestion) and dewaters what the clarifiers collect; volatile-solids reduction is the digestion performance measure.
Removal efficiency = (Cin − Cout)/Cin × 100%
Worked example Overall BOD removal
Given: A plant receives 200 mg/L BOD. Primary treatment removes 35%, and the secondary stage removes 85% of what reaches it. Find the final effluent BOD.
Solution:
- After primary: 200 × (1 − 0.35) = 130 mg/L.
- After secondary: 130 × (1 − 0.85) = 19.5 mg/L.
- Overall removal: (200 − 19.5)/200 = 90.25%.
Answer: Effluent BOD ≈ 19.5 mg/L; overall removal ≈ 90%.