Independent study aid. Not affiliated with or endorsed by NCEES. Always verify against the current NCEES exam specifications and reference handbook.

PE WRE Learning Hub · PE Civil: Water Resources and Environmental · Area 6 of 12

Hydraulics — Open Channel — PE WRE

Topic video on its way — a detailed walkthrough of Hydraulics — Open Channel, with animations and worked examples.

Watch the topic: the detailed video walkthrough of Hydraulics — Open Channel will sit here.

Take the 3-question mini-quiz ↓

Open-channel flow: Manning's equation

For uniform flow the depth is the normal depth and Manning's equation balances gravity against boundary roughness: Q = (1.486/n) A R2/3 S1/2 in US units, with hydraulic radius R = A/P. The 1.486 belongs to feet and seconds; the SI form uses 1.0. For a wide channel R is approximately the depth, a shortcut the exam uses often. Stormwater collection sizing is this same equation applied to gutters, swales and storm sewers flowing part-full.

Q = (1.486/n) · A · R2/3 · S1/2  ·  R = A/P

Worked example Manning discharge in a rectangular channel

Given: A rectangular channel 10 ft wide carries water 3 ft deep on a slope of 0.001 with n = 0.013. Find the discharge.

Solution:

  1. A = 10 × 3 = 30 ft²; wetted perimeter P = 10 + 2 × 3 = 16 ft; R = 30/16 = 1.875 ft.
  2. R2/3 = 1.52; S1/2 = 0.0316.
  3. Q = (1.486/0.013) × 30 × 1.52 × 0.0316 = 114.3 × 30 × 1.52 × 0.0316 ≈ 165 ft³/s.

Answer: Discharge ≈ 165 ft³/s (velocity ≈ 5.5 ft/s).

Subcritical and supercritical flow: specific energy and Froude

The Froude number, Fr = V/√(gD) with hydraulic depth D = A/T, classifies the regime: Fr < 1 is subcritical (deep, slow, controlled from downstream), Fr > 1 is supercritical (shallow, fast, controlled from upstream). At critical flow the specific energy is a minimum for the discharge, and for a rectangular channel the critical depth is yc = (q²/g)1/3 with unit discharge q = Q/b. Alternate depths share one specific energy; the sequent depth after a hydraulic jump follows from momentum, not energy — the jump itself dissipates energy.

Fr = V/√(gD)  ·  yc = (q²/g)1/3  ·  y2 = (y1/2)[√(1 + 8Fr1²) − 1]

Worked example Critical depth and regime

Given: A rectangular channel 10 ft wide carries 100 ft³/s. Find the critical depth, and classify the flow at a depth of 2 ft.

Solution:

  1. Unit discharge q = 100/10 = 10 ft²/s.
  2. yc = (10²/32.2)1/3 = (3.106)1/3 = 1.46 ft.
  3. At y = 2 ft: V = 100/(10 × 2) = 5 ft/s; Fr = 5/√(32.2 × 2) = 5/8.02 = 0.62. The depth exceeds critical and Fr < 1.

Answer: yc ≈ 1.46 ft; at 2 ft the flow is subcritical.

Culvert hydraulics and energy dissipation

A culvert flows under inlet control (the entrance geometry and headwater govern, as an orifice or weir) or outlet control (barrel friction, tailwater and exit losses govern) — compute both and take the condition giving the higher headwater. Energy dissipation protects the downstream bed where supercritical flow returns to subcritical: the hydraulic jump is the dissipator, and stilling basins hold it in place. The sequent-depth relation sizes the basin depth.

Sequent depth: y2 = (y1/2)[√(1 + 8Fr1²) − 1]  ·  Culvert: headwater = the greater of inlet-control and outlet-control values

Worked example Sequent depth of a hydraulic jump

Given: Flow enters a basin at y1 = 1.0 ft with Fr1 = 3.0. Find the sequent depth y2.

Solution:

  1. 1 + 8Fr1² = 1 + 8 × 9 = 73; √73 = 8.54.
  2. y2 = (1.0/2) × (8.54 − 1) = 0.5 × 7.54 = 3.77 ft.

Answer: Sequent depth ≈ 3.77 ft — the basin and tailwater must support about this depth.

3-question mini-quiz

Hydraulics — Open Channel

Choose your answer, then check it to see the result and explanation.

1. Flow with a Froude number of 1.8 is:

2. For a wide rectangular channel, the hydraulic radius is approximately:

3. A hydraulic jump occurs where:

Ready for the complete rehearsal?

Step up from this three-question taster to the full timed PE WRE simulation — 80 questions in exam conditions, with a per-area diagnostic.

Keep building exam speed

This whole hub is free — every area page, mini-quiz and podcast. When you are ready to rehearse under exam conditions, the separate PE WRE exam simulation runs the full 80 questions against the clock.

Preview the PE WRE exam simulation Open the exam simulator