Independent study aid. Not affiliated with or endorsed by NCEES. Always verify against the current NCEES exam specifications and reference handbook.

PE WRE Learning Hub · PE Civil: Water Resources and Environmental · Area 7 of 12

Hydrology — PE WRE

Topic video on its way — a detailed walkthrough of Hydrology, with animations and worked examples.

Watch the topic: the detailed video walkthrough of Hydrology will sit here.

Take the 3-question mini-quiz ↓

Runoff I: the rational method

The rational method estimates peak discharge as Q = CiA: a runoff coefficient C for the surface, the rainfall intensity i for a duration equal to the time of concentration (read from the IDF curve for the chosen return period), and the drainage area A. In US units the product comes out in ft³/s with only a nominal conversion (1 acre·in/hr ≈ 1.008 ft³/s), which the exam takes as 1. The method suits small, fairly uniform catchments; its peak occurs when the whole area contributes, which is exactly why the duration is set to the time of concentration.

Q = C i A  ·  Duration for i = time of concentration, from the IDF curve at the design return period

Worked example Rational-method peak flow

Given: A 10-acre catchment has C = 0.60. For the design return period, the IDF intensity at the time of concentration is 4.0 in/hr. Find the peak flow.

Solution:

  1. Q = C i A = 0.60 × 4.0 × 10 = 24.
  2. Units: acre·in/hr ≈ ft³/s, so Q ≈ 24 ft³/s.

Answer: Peak flow ≈ 24 ft³/s.

Runoff II: the NRCS curve-number method

The curve number folds soil group, land use and antecedent moisture into one number, CN. Potential retention is S = 1000/CN − 10 (inches), initial abstraction is taken as Ia = 0.2S, and runoff depth is Q = (P − Ia)²/(P − Ia + S) for P > Ia — below that threshold there is no runoff at all. The output is a depth over the catchment, converted to a volume with the area, and it is the input to hydrograph methods and detention sizing in stormwater management.

S = 1000/CN − 10  ·  Q = (P − 0.2S)² / (P + 0.8S)  for P > 0.2S, else Q = 0

Worked example Curve-number runoff depth

Given: A catchment has CN = 80 and receives P = 5.0 in of rain. Find the runoff depth.

Solution:

  1. S = 1000/80 − 10 = 12.5 − 10 = 2.5 in; Ia = 0.2 × 2.5 = 0.5 in.
  2. P − Ia = 4.5 in, which exceeds zero, so runoff occurs.
  3. Q = 4.5² / (4.5 + 2.5) = 20.25 / 7.0 = 2.89 in.

Answer: Runoff depth ≈ 2.89 in.

Hydrographs, IDF and time of concentration

A hydrograph distributes runoff in time. The NRCS triangular unit hydrograph peaks at qp = 484 A Q/Tp in US units (A in mi², Q in inches, Tp in hours), where the time to peak follows from the time of concentration — the travel time from the hydraulically most distant point, summed over sheet, shallow concentrated and channel flow segments. Gauging records and flood-frequency analysis set the design event; depletions and abstractions adjust it. Stormwater management then routes the hydrograph through storage — the routing, not the peak alone, sizes a detention basin.

qp = 484 A Q / Tp  (US)  ·  Tc = Σ segment travel times

Worked example Triangular unit-hydrograph peak

Given: A 2-mi² catchment produces 1 in of runoff with a time to peak of 3 hours. Find the peak discharge.

Solution:

  1. qp = 484 × 2 × 1 / 3 = 968/3 = 323 ft³/s.

Answer: Peak discharge ≈ 323 ft³/s.

3-question mini-quiz

Hydrology

Choose your answer, then check it to see the result and explanation.

1. For CN = 75, the potential retention S is:

2. The time of concentration is:

3. With C = 0.5, i = 6 in/hr and A = 5 acres, the rational peak flow is:

Ready for the complete rehearsal?

Step up from this three-question taster to the full timed PE WRE simulation — 80 questions in exam conditions, with a per-area diagnostic.

Keep building exam speed

This whole hub is free — every area page, mini-quiz and podcast. When you are ready to rehearse under exam conditions, the separate PE WRE exam simulation runs the full 80 questions against the clock.

Preview the PE WRE exam simulation Open the exam simulator