PE WRE Learning Hub · PE Civil: Water Resources and Environmental · Area 2 of 12
Soil Mechanics — PE WRE
Topic video on its way — a detailed walkthrough of Soil Mechanics, with animations and worked examples.
Watch the topic: the detailed video walkthrough of Soil Mechanics will sit here.
Take the 3-question mini-quiz ↓
Lateral earth pressure
Soil pushes sideways in proportion to the vertical effective stress. Rankine's active coefficient for a level backfill is Ka = (1 − sin φ)/(1 + sin φ); the passive coefficient Kp is its reciprocal. Active pressure acts when the wall yields away from the soil; at-rest pressure, K0 ≈ 1 − sin φ, is larger than active and applies to unyielding walls. The pressure diagram is triangular, so the resultant acts at one-third of the height from the base.
Ka = (1 − sin φ)/(1 + sin φ) · σh = Ka γ z · Pa = ½ Ka γ H²
Worked example Active pressure at depth
Given: A soil has φ = 30° and unit weight γ = 120 lb/ft³. Find the active lateral pressure at a depth of 10 ft.
Solution:
- Ka = (1 − sin 30°)/(1 + sin 30°) = 0.5/1.5 = 0.333.
- Vertical stress at 10 ft: 120 × 10 = 1,200 lb/ft².
- σh = 0.333 × 1,200 = 400 lb/ft².
Answer: Active pressure at 10 ft = 400 lb/ft².
Consolidation and settlement
When a saturated clay layer is loaded, the extra pore pressure drains away over time and the layer compresses — consolidation settlement. For a normally consolidated clay, s = [H0/(1 + e0)] Cc log[(σ′ + Δσ)/σ′], with the logarithm base 10. Compaction is different: it is the mechanical densification of fill, checked against the Proctor optimum moisture content, and it happens during construction, not over years of drainage.
s = [H0/(1 + e0)] · Cc · log10[(σ′0 + Δσ)/σ′0] · σ′ = σ − u
Worked example Primary consolidation settlement
Given: A clay layer is 10 ft thick with e0 = 1.0 and Cc = 0.30. The average effective stress rises from 1,000 to 2,000 lb/ft². Find the settlement.
Solution:
- Stress ratio: 2,000/1,000 = 2.0; log10(2.0) = 0.301.
- s = (10/2.0) × 0.30 × 0.301 = 0.452 ft.
- Convert: 0.452 × 12 = 5.4 in.
Answer: Settlement ≈ 0.45 ft (about 5.4 in).
Bearing capacity and slope stability
Terzaghi's bearing-capacity equation adds three terms: cohesion, surcharge and the weight of soil in the failure wedge, qult = cNc + qNq + 0.5γBNγ. For a saturated clay under undrained loading (φ = 0), Nc = 5.14, Nq = 1.0 and Nγ = 0. Allowable pressure divides the ultimate by a factor of safety, usually 3. Slope stability is the same idea in ratio form: factor of safety = resisting forces (or moments) ÷ driving forces (or moments).
qult = cNc + qNq + 0.5γBNγ · qall = qult/FS · FSslope = resisting / driving
Worked example Allowable bearing pressure on clay
Given: A footing bears on clay with c = 500 lb/ft² (φ = 0) at a depth of 3 ft in soil with γ = 110 lb/ft³. Using Nc = 5.14 and Nq = 1.0, find qult and qall with FS = 3.
Solution:
- Surcharge q = 110 × 3 = 330 lb/ft².
- qult = 500 × 5.14 + 330 × 1.0 + 0 = 2,570 + 330 = 2,900 lb/ft².
- qall = 2,900 / 3 = 967 lb/ft².
Answer: qult = 2,900 lb/ft²; qall ≈ 967 lb/ft².